Sound

Sound control

Quieter rooms in very high-end homes, specced for the room. People ask for soundproof drywall. We build a sound-control assembly, and we do not publish a rating.

How it works

A quieter bedroom, a primary suite, and a media room are not the same wall. We build sound control in stages, based on the framing that is already there and on what the room is for.

We start with acoustic batts in interior walls and floors. The next stage adds resilient channel and sealing so the drywall is not locked tight to the studs and the leaks around the wall are closed. The top stage is a decoupled assembly, with the specialty layers a media room or primary suite actually needs.

People ask for soundproof drywall. What we spec is a sound-control assembly: the framing, the floor, the doors, and how the drywall is fastened. We spec each project in person. We do not publish STC or IIC numbers, and we do not promise a room will be silent.

A ceiling that is itself the acoustic finish is a different scope. Suspended grids and other acoustic ceiling systems are on the acoustical ceilings page. When a room needs both, we plan the ceiling with these wall and floor stages.

The same tiles belong in the rooms that hold the equipment. A mechanical room, a utility room, or a furnace room feels bare when the joists stay open. Acoustical ceiling tiles make that room look comfy and homey, and quieter, without burying what you still need to reach. When the overhead should be finished drywall instead of tiles, a drywall grid ceiling hangs below the structure to lower the height or to cover ducts, pipes, and wiring.

When that overhead should be finished drywall instead of tiles, a drywall grid ceiling hangs below the structure to lower the height or to cover ducts, pipes, and wiring.

Why this detail

  • Acoustic batts in interior walls and between floors
  • Resilient channel and sealing as the next stage
  • Decoupled assemblies for media rooms and primary suites
  • Specified per house, not from a published rating

Good, better, best

Generic names for now. Each stage is specced for the house. No STC or IIC number is published.

Good

Acoustic batts

Acoustic fiberglass or mineral wool in interior walls and in the floors between rooms. The batt absorbs some sound inside the cavity. The drywall is still fastened to the framing, so sound that travels through the studs and joists is still there. This is the right first stage for many bedrooms and baths.

Better

Batts, RC channel, and sealing

The same batts, plus resilient channel on the drywall side, plus sealing at outlets, the perimeter, and the gap under the board. The channel lets the drywall flex instead of locking to the stud. Sealing closes the easy paths around the wall. Screws that hit the stud defeat the channel, so the fastening is part of the work. This is the same RC channel detail on the drywall page.

Best

Decoupled assemblies

For media rooms and primary suites, when the plan allows it: a decoupled assembly, acoustic batts, sealed penetrations, and the specialty layers that room needs. That can mean resilient channel, or a double or staggered stud wall if the framing was designed for it. We choose it per project. We do not treat it as a product you can order off a rating.

RC channel, on the drywall page

Acoustical ceilings, when the overhead finish is its own system.

Vaulted great room with tall windows, smooth painted walls, and mountain views.
Vaulted great room with tall windows, smooth painted walls, and mountain views.
Contemporary kitchen and dining area with smooth white walls and a flat ceiling, lit by a wall of windows.
Contemporary kitchen and dining area with smooth white walls and a flat ceiling, lit by a wall of windows.

Questions on this work

Will you guarantee a sound rating?

No. A rating depends on the whole assembly and on how it is tested. We will tell you what each stage changes, and we will spec the one that fits the room. We do not publish STC or IIC numbers.

Is this the same as the drywall RC channel work?

Resilient channel is the drywall detail in the middle stage. The channel is hung so the board fastens to it and not to the stud. That work is part of sound control and part of the drywall scope. The drywall crew hangs it.

The rest of the questions

Related

Towns we serve

Get a quote

What happens next

  1. You send the request.
  2. A person at CDI reads it.
  3. We call you back. Mon–Fri 8–5, call anytime for a return call

Have house plans? Send them with a residential estimate.

Upload plans for a free estimate

Estimate

How to get your price

  1. 1. Reach us your way Call (828) 376-3710, upload your plans, or send the request form.
  2. 2. We talk it through We make sure we know exactly what you want.
  3. 3. You get your price We'll already have it priced.

Send us your plans and we'll give you a free estimate. Final pricing is set after a field measure.

Upload plans for a free estimate Call (828) 376-3710

Estimate

Ready for a price? Call, send plans, or ask online.

Mon–Fri 8–5, call anytime for a return call