Questions

Asked before the foam goes in.

Straight answers about the materials and the schedule. Published R-values are typical product ranges, not a promise for a specific house.

What is the difference between open-cell and closed-cell spray foam?

Open-cell foam is softer and lighter, about 0.5 to 0.8 pounds per cubic foot, with typical R-values of R-3.6 to R-4.5 per inch. At common thicknesses it is an air barrier and it stays moisture-permeable. Closed-cell foam is rigid, about 1.8 to 2.3 pounds per cubic foot, typically R-5.8 to R-6.9 per inch. It resists water, can add stiffness in some assemblies, and at about 1.5 inches is usually a vapor retarder. Those ranges are from the Spray Polyurethane Foam Alliance. We use both. Open-cell is the usual foam on custom roofs, vaults, gables, bands, and cantilevers. Closed-cell goes where water or a thin cavity matters: porch ceilings, slab edges, rim joists, and crawl walls.

Is spray foam better than fiberglass batts?

For air sealing, yes. Spray foam fills gaps that batts cannot, which is why it cuts infiltration and often feels more even in a mountain climate. Batts are still a good, code-legal, and more economical choice in many walls, midfloors, and garages, and we install them every week. Exterior walls get R-19. The honest reason to choose foam is the air seal and, with closed-cell, more R per inch. It is not a claim that batts do not work.

What R-value do I need in Western North Carolina?

North Carolina’s energy code follows the IECC climate-zone map. Buncombe, Henderson, Haywood, Transylvania, and Madison counties sit in the mixed-humid Zone 4 area used for Asheville. The exact table depends on the code year named on the permit. We will match that permit and the inspector, not guess an edition in a FAQ. Attic and ceiling targets are much higher than walls. An attic floor on our takeoffs is often around R-38, and blown-in lines run from about R-13 through R-60 when the plans call for them. We insulate homes built to ENERGY STAR standards.

How much does spray foam cost, and what is the payback?

Every house is different: foam type, thickness, access, new build or retrofit. Once we talk with you and know exactly what you want, we'll already have it priced, with the R-value and thickness written out. Send your plans for a free estimate. Final pricing is set after a field measure.

Are there rebates or tax credits in 2026?

The federal Energy Efficient Home Improvement Credit, Section 25C, ended for property placed in service after December 31, 2025. Work done in 2026 does not qualify. When it existed it was a credit on qualifying insulation and air-sealing materials, not on labor, and it was for existing primary homes. Duke Energy Smart $aver is a separate, still-active utility program for residential electric customers, and the work has to meet Duke’s rules, including who may submit it. Energy Saver North Carolina HOMES is a state rebate for income-eligible households, generally tied to modeled energy savings, a free assessment, and a registered contractor. Whether a house qualifies, and for how much, is decided by those programs. We do not promise a rebate on an estimate. Details are on the rebates page.

What is crawlspace encapsulation, and do I need it?

A standard crawl is batt insulation in the floor above and 6 mil poly on the dirt. A sealed crawl closes the vents, puts a heavy liner on the ground (12 or 20 mil, usually 20), insulates the foundation walls, covers the piers, tapes the seams, and can add a dehumidifier sized from the floor area. In Western North Carolina’s damp climate that sealed assembly is often the more durable way to keep floors warm and crawl air dry. Encapsulation as a named measure is generally not the same thing as an attic rebate. Parts of a job, such as air sealing or insulation, may still fall under other programs. We price both crawls after we see the house.

Will a sealed crawl help with mold?

Dry crawl air and a continuous ground liner take away a lot of the moisture mold needs. That is prevention: the liner, the insulated walls, and a dehumidifier sized to the floor. The EPA’s point is to fix the moisture source. Insulation and a liner are part of keeping the assembly dry. This is not a promise that a liner changes a structure that is already wet. If the crawl is wet, the first work is drainage and a dry assembly, planned with the rest of the shell.

What is air sealing, and do I need a blower-door test?

Air sealing closes the holes so the R-value you paid for can work. Spray foam does much of that as it is installed. We also caulk baseplates and can foam around doors and windows. A blower-door test measures the leakage that remains, often as air changes per hour at 50 pascals, and some rebate and code paths require one. We air-seal to the plan and can work with your rater’s numbers.

What codes do you build to?

The current North Carolina codes, which right now are the 2018 residential, building, and energy books. The 2024 codes are adopted and not yet in effect. Plain-English notes and links to the official books are on the What we go by page. Your local inspector has the final word. We guarantee your insulation passes inspection. If it does not, we'll make it right.

How does North Carolina’s energy code affect my job?

The permit names the code year. Insulation depth, vapor control, and, for exposed spray foam, a thermal or ignition barrier have to match that code and the official’s reading. Every spray foam house includes a complimentary REScheck, the energy code compliance report for that house. We will match the permit. We will not pick a code edition for you in a marketing answer.

Is a REScheck included?

Yes. A complimentary REScheck is included with every spray foam house. It is the energy code compliance report for that house.

What is the passed insulation inspection guarantee?

We guarantee your insulation passes inspection. If it does not, we'll make it right.

How long does a spray-foam job take, and when can we come back in the house?

On a new custom home, foam is a scheduled window between framing and drywall, often measured in days once the house is ready, not in weeks. For a house people are living in, re-entry is a safety question. Industry guidance commonly keeps unprotected occupants out for up to 24 hours after high-pressure spray, and sometimes less when a specific product and a specific ventilation rate say so. Other trades may come back sooner if that product allows it. We follow the instructions for the foam used on that job. Drywall is the usual thermal barrier over exposed foam, and we hang it next.

Is spray foam safe after it cures?

During the install, the chemicals are not something to breathe. The work zone is isolated and the crew wears protection. After the foam has cured and the manufacturer’s re-entry time has passed, it is a stable plastic insulation used in homes, including high-end custom work. Exposed foam in an occupied room may still need a thermal or ignition barrier, often the drywall we hang next. That is one reason insulation and drywall in one sequence is a cleaner job.

Why should one company do the insulation and the drywall?

On a custom home, the drywall crew walks in when the foam and the batts are ready. Insulation and drywall are different specialized crews. They work for one company, on one schedule. There is no gap while two companies sort out who covers the foam, and there is one office to call if something needs a patch. That is the model: from studs to ready to paint. Carolina Drywall and Insulation has worked this way since 2011.

Do you only work on new custom homes?

Very high-end custom homes are the work we are built around, and much of that is at The Cliffs communities. Projects of every size are welcome, including attics, crawls, and apple cooler insulation for growers in the Edneyville community. Most of the residential work is for Western North Carolina custom builders. If the house is still in framing, plans help. If it is an existing attic or crawl, a visit is better.

Will you work with my builder?

Yes. Most of the work is for custom builders across Western North Carolina. We do not publish builder names on this site. A logo goes up only after that builder says we may use it.

How do I get a quote?

Three easy steps: call (828) 376-3710, upload your plans, or send the request form. We talk it through with you. Then you get your price. For an existing attic or crawl, we'll set up a quick visit. Final pricing is set after a field measure. The office is at 258 Mills Gap Rd, Fletcher, NC 28732.

What we go by: the codes we build to

Estimate

Ready for a price? Call, send plans, or ask online.

Mon–Fri 8–5, call anytime for a return call